19
18
Troubleshooting
Remote does not operate your product.
• Press the mode button of the product you want to
control.
• Program the remote with a new code.
• Install new batteries. (You might have to reprogram
your remote after installing new batteries.)
• Remote may not be compatible with your product.
Remote does not operate some features of your product.
• Program remote with a new code.
• Remote may not be able to operate all features of
your product or button names might be different
than your product.
Red Indicator blinks after you program a product code.
• Remote did not accept the code.
• Try to program the code again or try a different
code.
To Clear all Learned Commands under a mode
Clearing learned commands is helpful if, for example, you
replace your CD player with another brand or model. If
you had learned a feature from your old CD player’s
original remote on to this remote (such as RANDOM
PLAY), that feature would no longer work for your new
CD player. Should you wish to remove or clear one or
more “learned” commands, follow the steps below:
1. Press and hold the
SETUP
button until the red
indicator turns on. Release the
SETUP
button.
2. Press and release the button for the mode you want
to clear (
TV
,
VCR
, etc.). The red indicator blinks off.
3. Press and release the
LEARN
button TWICE. The
red indicator blinks off.
4. Press and release the
SETUP
button. The red
indicator turns off. All learned Commands under that
mode are now cleared.
Master Clear - To Clear all Learned
Commands under all modes
1. Press and hold the
SETUP
button until the red
indicator turns on. Release the
SETUP
button.
2. Press and release the
LEARN
button TWICE. The
red indicator blinks off.
3. Press and release the
SETUP
button. The red
indicator turns off. All Learned commands in the
remote are now cleared.
Clearing Commands
Jasco Products Company warrants this product to be
free from manufacturing defects for a period of ninety
days from the original date of consumer purchase. This
warranty is limited to the repair or replacement of this
product only and does not extend to consequential or
incidental damage to other products that may be used
with this unit. This warranty is in lieu of all other
warranties express or implied. Some states do not allow
limitations on how long an implied warranty lasts or
permit the exclusion or limitation of incidental or
consequential damages, so the above limitations may
not apply to you. This warranty gives you specific
rights, and you may also have other rights which vary
from state to state. If unit should prove defective within
the warranty period, return prepaid with dated proof of
purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City, OK 73114
90 Day Limited Warranty
Lost Your Codes?
Enclosed with this remote is a sticker on which you
should write the codes for each device you programmed.
Apply the sticker to the back of the remote or
somewhere convenient for future reference.
Also on the sticker is our website address which, should
you lose your codes or programming instructions, you
can find available on our website:
www.jascoproducts.com
