GE 24959, Instruction Manual

17

Troubleshooting

Remote does not operate your product

1.  Select the mode for the product you want to 

control.

2.  Program the remote with a new code.
3.  Install new batteries in the remote. (You might 

have to reprogram your remote after installing 
new batteries.)

4.  If these steps do not work, the remote might not 

be compatible with your product.

Remote does not operate some 
features of your product

1.  Program remote with a new code.
2.  If this does not work, your remote might not be 

able to operate all features of your product or 
the button names might be different than your 
product.

Indicator blinks after you program a 
product code

1.  This means the remote did not accept the code.
2.  Try to program the code again or try a different 

code.

Lost Your Codes?

Enclosed with this remote is a sticker on which 
you should write the codes for each device you 
programmed. Apply the sticker to the back of 
the remote or somewhere convenient for future 
reference.

Also on the sticker is our website address which, 
should you lose your codes or programming 
instructions, you can 

fi

 nd available on our website:

www.jascoproducts.com