GE 24999 Instruction Manual Download | Manualshive

Page: 10 / 21

background image

10

System Setup Options
Pressing.

OK at.the.SYSTEM.SETUP.screen.accesses.the.System.Setup.

Options.for.Volume.Punch-Through.control.Setup,.Time.Setup,.Date.Setup,.
Backlight.Setup.and.System.Reset.

Volume/Mute Control and Punch-Through Feature
Your.remote.allows.you.to.select.which.device.mode.controls.VOLUME.
and.MUTE..This.remote.is.initially.set.for.all.device.modes.to.use.their.
own.Volume/Mute.control.if.present..If.the.programmed.code.does.not.
have.Volume/Mute.operation,.then.VOLUME.and.MUTE.will.“punch-
through”.(hand-over).control.to.the.TV.mode.device.without.you.
needing.to.change.to.TV.mode..Note:.Any.mode.chosen.for.Volume/
Mute.control.must.have.its.own.Volume/Mute.function.or.else.VOLUME.
and.MUTE.will.not.function.

Setting ALL Volume/Mute Control to any one Mode (ALL VOL. SET)

This.routine.can.set.all.Modes.to.“punch-through”.to.any.one.chosen.
Mode.for.Volume/Mute.button.control.without.needing.to.change.to.
that.Mode.

1..Press.and.hold.the.

SETUP.button.until.CODE.SETUP.is.displayed.

(takes.about.3.seconds),.then.release.the

SETUP.button.

2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.

OK..VOL/MUTE.SETUP.is.displayed.

4..Press.and.release.

OK..ALL.VOL..SET.is.displayed.

5..Press.and.release.

OK..ALL.VOL..MODE?.is.displayed.

6..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).for.Volume/

Mute.control..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.
and.the.remote.returns.to.normal.operation.

All. Modes. will. now. punch-through. to. your. chosen. Mode. for. Volume/
Mute.control..If.the.chosen.Mode.has.no.Volume/Mute.commands.of.its.
own,.“Volume.Error”.is.shown.in.the.display.and.the.remote.returns.to.
normal.operation..

Setting any Mode to use its own Volume/Mute Control (MODE VOL.

SET)

This.sets.any.Mode.to.use.only.its.own.Volume/Mute.control,.i.e..
Volume/Mute.punch-through.is.disabled.for.this.Mode..Note.-.If.your.
chosen.Mode.has.no.Volume/Mute.functions.of.its.own.then.the.
Volume/Mute.buttons.will.do.nothing.

1..Press.and.hold.the.

SETUP.button.until.CODE.SETUP.is.displayed.

(takes.about.3.seconds),.then.release.the

SETUP.button.

2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.

OK..VOL/MUTE.SETUP.is.displayed.

4..Press.and.release.

OK..ALL.VOL..SET.is.displayed.

5..Press.the.down.navigation.button.until.MODE.VOL..SET.is.displayed.
6..Press.and.release.

OK..MODE.VOL..MODE?.is.displayed.

7..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).to.be.disabled.

for.Volume/Mute.punch-through.control..PLEASE.WAIT.is.briefly.
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.
operation.

The.chosen.Mode.will.now.use.its.own.Volume/Mute.control.

Setup, cont.

«
...
8
9
10
11
12
...
»

Summary of Contents for 24999






















Reviews:

No comments

Related manuals for 24999

IconRemote IR18A

Brand: X10 Pages: 11

Brand: One for All Pages: 168

Brand: Universal Remote Control Pages: 2

Brand: Universal Remote Control Pages: 2

Brand: Universal Remote Control Pages: 2

Brand: Universal Remote Control Pages: 2

Complete Control MX-780

Brand: Universal Remote Control Pages: 16

Brand: Universal Remote Control Pages: 16

Brand: Universal Remote Control Pages: 18

COMPLETE CONTROL MX-880Z

Brand: Universal Remote Control Pages: 20

Unifier URC-100

Brand: Universal Remote Control Pages: 54

Brand: Universal Remote Control Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands