13
P
ROGRAMMING
THE
T
ELEPHONE
S
TANDBY
S
CREEN
The handset displays the handset number and user name.
P
ROGRAMMING
F
UNCTIONS
The system uses a menu structure to give you access to all of the built-in features. You
may program the following items in main menu: Room Monitor, Handset Setup.
R
OOM
M
ONITOR
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CALLER ID-VOL (- or +) button to scroll to ROOM MONITOR.
4. Press MUTE/PROG button to enter
ROOM MONITOR
menu,
ROOM MONITOR
EXTENSION?
shows in the display.
5. Use the touch tone pad to enter the handset number to be monitored, either 1
or 2.
NOTE:
When this phone system is expanded (up to 4 handsets by purchase of
optional Model 25832A handset with recharge cradle), handsets are named
HANDSET 1, HANDSET 2, HANDSET 3 and HANDSET 4 respectively.
6. The receiving handset will turn on the microphone and the originating handset
will turn on the speakerphone to monitor sound from the receiving handset.
NOTE:
For room monitoring mode to work, the originating handset must
NOT be on the cradle.
NOTE:
While in room monitoring mode, the handsets will emit an alert tone
approximately every 5 seconds if there is an incoming call. You may press the
SPEAKER button to quit room monitor and answer the call.
USER NAME
HANDSET X
> ROOM MONITOR
HANDSET SETUP
