7
Hold
Press the
HOLD
soft key to put a call on hold.
LX ON HOLD
shows in the display, where
X
is
the line number.
To take a call off hold, press the
UNHOLD
soft key.
• To switch a call on hold from the base to the cordless handset, press the TALK/LINE1/
flash1, TALK/LINE/flash or handsfree button on the handset.
Paging the Cordless Handset
This feature helps you locate a misplaced handset.
Press and release the page button on the base. The cordless handset beeps intermittently
and displays
PAGING FROM BASE
for about two minutes or until you press
OK
soft key on
the handset or press page on the base.
NOTE: You may still page the cordless handset even if the ringer is
turned off.
Global De-registration
If one or more handsets become lost, you should de-register all handsets to ensure proper
system operation. Follow the steps below to de-register all handsets at the same time.
WARNING: It is not recommended that a handset be de-registered
unless absolutely necessary because once a handset is de-registered,
that handset’s telephone features cannot be used until the handset is
re-registered.
1. Press and hold the page button on the base until the CHARGE/IN USE indicator on the
base flashes.
. Press and hold the page button on the base again until the CHARGE/IN USE indicator
on the base flashes rapidly.
. Press and release the page button on the base once. All handsets are de-registered
and
PLEASE REGISTER
shows in the handsets' display.
Room Monitor
Room monitoring may be done from the base or the handset. Begin with unit you want to
monitor with (the microphone);
1. Make sure your phone is
OFF
(not in talk mode).
. Press the
MENU
soft key to go to the main menu.
. Use the
5
or
6
buttons to scroll to
ROOM MONITOR
.
4. Press the
SELECT
soft key to confirm.
