4
To erase all messages from the base:
1. Press the PLAY/STOP. The message plays.
. Press and hold the delete button.
ERASE ALL MESSAGES?
shows in the display.
. Press the
YES
soft key to confirm the deletion.
ALL MESSAGES ERASED
shows in the
display.
To erase a message from the handset:
1. Press the
MENU
soft key on the handset.
. Use the
5
or
6
buttons to scroll to
MESSAGES
.
. Press the
SELECT
soft key to confirm.
MAILBOX 1 (XX) MAILBOX 2 (XX)
shows in display,
where
XX
is the number of the new messages in the mail box.
4. Use the
5
or
6
buttons to select the desired mailbox.
5. Press the
SELECT
soft key to confirm.
ANSWERER REMOTE ACCESS
shows in display.
6. Press the PLAY/STOP on the handset (the button). The message plays.
7. Press the ERASE (the 0 button) to erase the message during message playback.
Leaving a Memo
Base Unit
1. Press and hold the memo/msg fwd button on the base. You must hold the button until
you finish recording the memo.
. Begin speaking after you hear the beep.
. Release the memo/msg fwd button when finished.
NOTE: Message will default record in Mailbox 1.
Cordless Handset
1. Press
MENU
soft key on the handset.
. Use the
5
or
6
buttons to scroll to
MESSAGES
.
. Press the
SELECT
soft key to confirm.
MAILBOX 1 (XX) MAILBOX 2 (XX)
shows in display,
where
XX
is the number of the new messages in the mail box.
4. Use the
5
or
6
buttons to select the desired mailbox which you want to leave the
message.
5. Press the
SELECT
soft key to confirm.
ANSWERER REMOTE ACCESS
shows in display.
6. Press the MEMO on the handset (the 5 button) to start.
7. Begin speaking when
RECORDING MEMO
shows in the display.
. Press the
END
soft key when finished.
NOTE: Make sure the
END
soft key is pressed after finished recording
memo or it will not be recorded in the mailbox.
