32
Depending on (a) how the incoming caller’s phone number is formatted
when received, and (b) whether or not you pre-programmed your local
area code into memory, you may need to adjust the format of the caller’s
phone number before dialing it back.
The format button lets you change the format of the displayed number.
Available formats include:
Number of digits
Explanation
Example
Eleven digits
long distance code “1”
+ 3-digit area code
+ 7-digit telephone number.
1-317-888-8888
Ten digits
3-digit area code +
7-digit telephone number.
317-888-8888
Seven digits
7-digit telephone number.
888-8888
NOTE:
If the phone company does not supply all ten digits of an incoming
caller’s number, you will not be allowed to adjust the format of that number.
Scroll to the number you want to call back:
3. If using the base or handset: press the caller ID (rev or skip) button (on
base) or caller ID/vol (- or +) button (on cordless handset).
4. If the number does not dial as shown, press the format button on base or
format/answerer button on cordless handset. Repeat if necessary, until
the correct number of digits show in the display.
5. Press the talk/end/call back button on handset or speaker/call back button
on base. The number dials automatically.
NOTES:
If you find it necessary to dial all local calls with the area codes
included press program/flash button on base or flash/prog on handset until
SET AREA CODE
appears, then enter
000
.
If the number is corrupted, such as a number in a name or an alphabetical
character in a number, an error tone comes from the handset and the number
won’t dial.
