9
Storing the Last Number Dialed
Store a dialed number when reviewing it:
1. Make sure the phone is
OFF
(not in talk mode).
. Press the REDIAL button on the handset to access the
DIALED
menu.
3. Use the
6
or
5
button to scroll to desired record.
4. Press SELECT button and the display shows
STORE?
.
5. Press SELECT button again to confirm and the display shows
ENTER
NAME
.
6. Repeat Steps 6 through 13 in the section Adding Phone Book Entries,
except instead of entering the number as indicated in Step 8, the dialed
number shows on the display.
NOTE: If the phone book has 50 entries,
FULL
shows on the
display and you must delete a record before adding a new one.
NOTE: If the dialed number is longer than 20 digits, it cannot
be stored.
Inserting a Pause in the Dialing Sequence
(of a Stored Number)
Press the #PAUSE button on the handset to insert a delay in dialing
sequence of a stored number when a pause is needed to wait for a dial
tone (for example, after you dial 9 for an outside line, or to wait for a
computer access tone.) Each pause counts as one digit in the dialing
sequence.
You can press the #PAUSE button to insert a P (pause) when you enter the
telephone number when adding a phone book entry.
Reviewing Phone Book Records
1. Make sure your phone is
OFF
(not in talk mode).
. Press the MENU button and use the
6
or
5
button to scroll to
PHONE
BOOK
.
3. Press the SELECT button to enter the phone book.
NOTE: You may press the PHONEBOOK button to shortcut to the phone
book, too.
4. Use the
6
or
5
button to scroll the records
- OR -
Press the number keys to go to the name of the records started with
the corresponding character.
NOTE: Your phone book records are sorted automatically in
alphabetical order.
5. Press the SELECT button to view the details of the record.
6. Use the
6
or
5
button to view the picture ID set, if any.
