8
CAUTION:
Disconnect the phone cord
from the wall outlet before installing or
replacing the batteries.
1. Remove the mounting bracket from the
back of the base.
2. Use a phillips screwdriver to remove the
screw and a flat-head screwdriver to pry
up the battery compartment door on the
bottom of the phone.
3. Insert 4 AA-size alkaline batteries as
shown on the diagram in the battery
compartment.
4. Snap the battery compartment door back
into place and replace the screw and the
mounting bracket.
5. If the line cord was previously
connected, re-attach it to the unit and
check your memory locations.
NOTE:
If the low battery icon appears in
the display, you need to replace the
batteries. It is important that you replace the
batteries as soon as possible in order to
maintain Caller ID operation.
