22
How to set the oven for cleaning
The control can be set to self-clean the oven using very
high temperatures, during which time the oven door must
be locked. The cleaning time can be set from 2 hours of
cleaning for light soiling, or up to 4 hours for heavy
soiling. Use 3 hours for normal cleaning.
Before Self-cleaning
1. Follow the instruction in “BEFORE SELF-CLEANING
THE OVEN”.
How to set the controls to start the self-cleaning now
1. With the oven door closed, slide the latch handle to the
right as far as it will go. (Never force the latch handle
or you could damage the locking mechanism.)
2. Press the
CLEAN
button. (
0:00
will be
displayed and the
‘CLEAN’
light will
start flashing.)
NOTE:
“dr” will be displayed and the control cannot be
set for self-cleaning if the latch handle has not
been moved to the locked position.
3. Press the
UP/DOWN ARROW
buttons. (The default
clean time of 3:00 will be displayed.)
4. Press the
UP/DOWN ARROW
button for a longer or
shorter clean time.
5. Five seconds after the
UP/DOWN ARROW
buttons have
been pressed for the last time, the
‘CLEAN’
indicator
light will stop flashing, the
“OVEN ON”
light will
come on and the self-cleaning cycle will start.
6. The display will show the amount of clean time
remaining. (As the oven heats up, the door latch
mechanism operates to prevent the latch handle from
being slid to the left, and prevents the door from being
opened.)
7. After the cleaning cycle, the indicator lights will go
out and the clock will be displayed. (The oven door
cannot be opened until the oven has cooled down.)
8. Wait an additional 1
hours, then slide the
latch handle to the
left, back to the un-
locked position.
NOTE:
Press the
OFF
button if you want to cancel the
self-clean cycle after it has started. Allow the
oven to cool down before unlatching the door.
How to set the control to start the self-cleaning
at some later time
The control can be set to start the self-clean cycle at
some time within the next 12 hours.
For example:
Say that it is 7:00 am now and you want the
oven to be cleaned for 4 hours starting at
8:00 am.
Here is how to set the control:
1. Read and follow the instructions in “BEFORE SELF-
CLEANING THE OVEN”.
2. With the oven door closed, slide the latch handle to the
right as far as it will go. (Never force the latch handle
or you could damage the locking mechanism.)
3. Press the
CLEAN
button. (
0:00
will be displayed and the
‘CLEAN’
light will start flashing.)
4. Press the
UP/DOWN ARROW
button. (
3:00
will be
displayed.)
5. Press the
UP/DOWN ARROW
buttons until 4:00 (the
cleaning time) is displayed.
6. Press the
START TIME
button. (The current time of
7:00
will be displayed.)
7. Press the
UP ARROW
button to change the start time to
8:00.
8. Five seconds after the
UP/DOWN ARROW
buttons have
been pressed for the last time, the control will be set.
9. At 8:00 am the self-clean cycle will start and shut-off
at 12:00.
10. The display will show the amount of clean time
remaining. (As the oven heats up, the door latch
mechanism operates to prevent the latch handle from
being slid to the left and prevents the door from being
opened.)
11. After the cleaning cycle, the indicator lights will go
out and the clock will be displayed. (The oven door
cannot be opened until the oven has cooled down.)
Wait an additional 1 hour, then slide the latch handle to
the left, back to the un-locked position.
Operating the Self-Cleaning Oven
(on some models) Normal Cleaning Time: 3 hours
Summary of Contents for 30M06AAG
