11
Using Your Remote, cont.
3. Press and release the
MUTE
button.
4. Press and release the
VOL - button
.
The red indicator light will blink twice
and go off.
Code Identifi cation
1. Press and hold the
SETUP
button
until the red indicator stays on
(approximately 2 seconds) and then
release the button.
2. Press and release the desired device
button (
TV, DVD, CBL/SAT, DVR/AUX
)
you would like the code for.
3. Press and release
ENTER
button.
4. Press and release the
#1
button.
Count the number of times the
remote light fl ashes. This is the
number corresponding to the fi rst
digit of the code. Repeat the process
by pressing the
#2, #3
and
#4
buttons for the remaining digits.
5. Press and release
ENTER
button to
exit this mode.
Reset to Factory Settings
1. Press and hold the
SETUP
button
until the red indicator stays on
(approximately 2 seconds) and then
release the button.
2. Press and release the
MUTE
button.
3. Press and release the number
#0
button. The red indicator light will
fl ash twice.
