32
• To turn a
SCENE
off, press and release the
CH -
key for less
than one second. The screen will display
OFF
above the
selected
SCENE
.
Removing a Device (Node / Light) From a Scene
This only removes the device from a specific scene. The device is
still part of your home control network and the scene still exists (if
there is more than one device in the scene).
1. Enter Z-Wave setup mode and highlight
SCENE SETUP
2. Press
OK
; the screen will display
ADD
3. Press the right arrow key once; the screen will display
REMOVE
.
4. Press
OK
; the screen will display
SEL DIGIT
5. Press a digit (1-9) for the scene you wish to add the device to.
Press
SHIFT
and the digit (1-9) if you are adding devices to
scenes 10 through 18. The screen will display the scene you’ve
chosen.
6. Press
OK
; the letter “W” will be displayed in the upper left hand
corner and the Z-Wave light will begin blinking indicating the
remote is waiting to remove your device.
7. Press the button on the device so it communicates with the
remote.
8. When the screen displays
SUCCESSFUL
you have successfully
removed the Node/Light from the scene.
Deleting a Scene
This only deletes the specific scene. All of the devices are still part
of your home control network.
1. Enter Z-Wave setup mode and highlight
SCENE SETUP
2. Press
OK
; the screen will display
ADD
3. Press the right arrow key twice; the screen will display
DELETE
.
4. Press
OK
; the screen will display
SEL DIGIT
5. Press a digit (1-9) for the scene you wish to add the device to.
Press
SHIFT
and the digit (1-9) if you are adding devices to
scenes 10 through 18. The screen will display the scene you’ve
chosen.
6. Press
OK
; the screen will display
SUCCESSFUL
to indicate that
the scene has been deleted.
Labels
Individual
LIGHTS
,
GROUPS
and
SCENES
can all be labeled to help
identify their function or location in your home. The process is the
same for all three.
