41
6. Place the Secondary remote in
RECEIVE
mode. See the
following section on “Receiving Network and Device
Information” if the Secondary remote is a GE 45608 remote.
If the Secondary remote is a different GE model or different
brand, please refer to its instructions for details.
7. After the Secondary remote is in the
RECEIVE
mode press
OK
on the Primary remote; the screen will display
SENDING
.
The Primary remote then transmits the network and device
information to the new Secondary remote.
8. Both remotes should indicate a successful completion of the
copying process.
a. The 45608’s screen will display
SUCCESSFUL
.
b. Other GE models or other brands will indicate success in
various ways, depending on the remote’s capabilities.
Please refer to its instructions for details.
Receiving Network and Device Information
1. Enter Z-Wave setup mode and highlight
TRANSFER
2. Press
OK
; the screen will display
CREATE SECONDARY
3. Use the
ARROW
keys to scroll to
RECEIVE
.
4. Press
OK
; the screen will display
RECEIVING
5. Place the Primary remote in “Transmit” mode. See the previous
section on “Creating a Secondary Controller” or “Controller
Swap” if the Primary controller is a GE 45608 remote. If the
Primary remote is a different GE model or different brand,
please refer to its instructions for details.
6. After the Primary remote is in the “Transmit” mode, press
OK
on this remote; the screen will display
RECEIVING
. The Primary
remote then transmits the network and device information to
the new remote.
7. Both remotes should indicate a successful completion of the
copying process.
a. The 45608’s screen will display
SUCCESSFUL
.
b. Other GE models or other brands will indicate success in
various ways, depending on the remote’s capabilities. Please
refer to its instructions for details.
