in 30 seconds. The siren will sound
for 30 seconds (unless disarmed by
the remote) and then turn off. In 1
seconds the alarm will check for
motion. If motion is detected, the siren
will sound again. The cycle will repeat
until the unit is disarmed with the
remote.
Disarming the Alarm
When returning to the protected area,
simply enter your -digit code within
30 seconds to disarm the alarm.
When the fourth digit of your code is
entered, the unit will respond with two
tones and the indicator light will flash
green twice.
The unit will beep once if motion is sensed.
If the correct code is not entered within
30 seconds, the alarm will sound. Enter
correct code anytime after the alarm has
1.
2.
