![background image](http://html.mh-extra.com/html/ge/5151219/5151219_basic-service-manual_128515173.webp)
GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Chapter 7 Diagnostics/Troubleshooting
7-25
Insite II Configuration (For LOGIQ e R6.x.x/R7.x.x and LOGIQ e Vet R6.x.x/
3.) Set Disruptive Mode Status as
Enabled
.
Change to Utilities page. select Disruptive Mode in the left
column, Check whether the Disruptive Mode Status is
Enabled
, if not, click Yes to change the
Disruptive Mode Status as
Enabled
. See
There is another way to Set Disruptive Mode Status as
Enabled
. Click Insite Icon in system status bar,
choose
Connect clinical Lifeline
, the Insite Icon will change to RED, do not need to change if the Insite
icon is already RED. See
Figure 7-28 Device_Information page
Figure 7-29 Set Disruptive Mode Status
Summary of Contents for 5151219
Page 271: ......