Motion.
Depicts motion detected by the motion sensors in
your home. A green check indicates no recent motion
detected. A red exclamation point indicates motion was
detected within the last 10 minutes. A typical use for this
feature would be to have a touch screen in the garage to
see if movement is detected in the home before you enter
the home.
Property.
Depicts other changes to protected property in
your system. For example activation of a water sensor,
freeze sensor, or the movement of protected items. A green
check indicates no change since the last time you visited (for
movement of a protected item) and all sensors are closed
(water or freeze sensors). A red exclamation point indicates
either a sensor is tripped or there is unacknowledged
activity.
Note:
These icons may contain the text “N/A” which indicates your
system is not configured to support this feature. Consult your
dealer for additional information.
Arming icons
The arming icons are located below the home status icons. The
icons indicate the armed status of the security system.
PRESS TO ARM.
When the icon shows “PRESS TO
ARM”, touch to access the Arm screen.
or
PRESS TO DISARM.
One of these icons will display
depending on your arming level. Press to disarm
your system (door, window, and/or motion
sensors). Enter your code in the keypad screen
that appears. If you enter an incorrect code,
press the Clear button and enter the correct
code.
Arming screen
When you touch the PRESS TO ARM icon on the Home screen, the
Arm screen appears with the following arming choices:
Arm All (Away).
This is the typical selection
when you are leaving the home. The doors,
windows, and motion sensors will be armed
and the arming countdown will appear at the
bottom of the screen.
Arm Doors+Windows Only (Stay).
This is the
typical selection when you are staying home.
The doors and windows will be armed and the
arming countdown will appear at the bottom
of the screen.
Motion Sensors Only (Away).
This is the best
selection if you are leaving the home, but want
to keep a door or window open while you are
gone. Only the motion sensors will arm and
the arming countdown will appear at the
bottom of the screen.
Note: Depending on your configuration, this
button may or may not appear.
Optional arming choices
These settings are optional (for more advanced arming features).
Silent arming
. Press this button to silence your exit beeps during
arming. (Your exit time will double).
No delay.
Press this button to set your entrance timer to zero. (Use
the No Delay feature when you are asleep, or when you are away
from home and will carry a wireless touchpad that allows you to
disarm the system before opening a protected door). When you
select the No Delay option, an icon (a clock with a slash through it)
will appear over the lock.
Arming errors
If you select an arming option on the Arm screen, and there is an
arming problem, an arming error message will appear at the
bottom of the screen, indicating what the problem is and how to
correct it. For example, you might see a message that indicates
that you need to close the front door.
Correct the problem as indicated or press the Bypass button. You
will see the arming countdown message at the bottom of the
screen. You can touch the Cancel button and enter your code to
stop the arming process.
Settings screen
When you touch the Settings icon
on the Home screen, the
Settings screen appears.
Touch screen status icons
The touch screen status icons in the upper left corner of the
screen represent the health of this touch screen:
Battery status icon.
Indicates this touch screen’s battery
life (red = depleted, green = good).
AC power status icon.
Indicates that this touch screen is
plugged in and AC power is on (red = off, green = on).
Connected RF status icon.
Indicates the signal strength
between this touch screen and the security system (red = no
signal, green = signal). In case of loss of connection, you will
receive an error message with instructions.
Setting options
The Setting options allow you to adjust this touch screen’s
features. Typical status indicators (excluding light screen):
•
Gold indicates a button is selected.
•
Blue indicates buttons that are not selected.
2 / 4
P/N 466-2401 • REV A • ISS 17JAN11
