background image

RISK OF ELECTRIC SHOCK

• Turn power off before inspection, installation or removal.
• Properly ground the LED system.

RISK OF FIRE

• Follow all NEC and local codes.

WARNING/AVERTISSEMENT

RISQUES DE DÉCHARGES ÉLECTRIQUES

• Coupez l’alimentation avant l’inspection, l’installation ou le déplacement.
• Mettre à terre le système DEL de la façon appropriée.

RISQUES D’INCENDIE

• Respectez tous les codes NEC et codes locaux.

BEFORE YOU BEGIN

Read these instructions completely and carefully.

Save These Instructions

This product is intended solely for the use of non-

residential architecture lighting and is not intended for 

use in any other application. 

Prepare Electrical Wiring

Electrical Requirements

• Do not use in wet locations.

• The grounding and bonding of the LED system shall    

  be done in accordance with National Electric Code  

 

  (NEC) Article 600.
• Follow all National Electric Codes (NEC) and local codes.

GE LED Wall Washer

LED Lighting System

imagination at work

GE

Lighting

Installation Guide

Product Codes

62191, 62192, 62195, 62196, 62199, 62200, 62202, 62203, 62204, 62205, 62206, 
62207, 65444, 65445, 65446, 65447, 65448, 65449

Summary of Contents for 62191

Page 1: ...mpletely and carefully Save These Instructions This product is intended solely for the use of non residential architecture lighting and is not intended for use in any other application Prepare Electrical Wiring Electrical Requirements Do not use in wet locations The grounding and bonding of the LED system shall be done in accordance with National Electric Code NEC Article 600 Follow all National E...

Page 2: ...ds Mounting surface Mounting track can be installed at 0 and 30 degree angles Fixture has three positions at 10 degree increments 0 10 10 20 30 40 50 20 30 40 50 1 2 3 4 5 6 6 GE LED Wall Washer Fixtures Leader Cable with End Cap 62208 62211 Mounting track with bracket 65467 UL approved 18 14 AWG 0 82 2 08 mm2 wire connectors or In Line Splice Connector 75545 10 M5 self tapping flathead screws Opt...

Page 3: ...them together Connect the leader cable to the power source and dimmer OPTIONAL If dimming is not used cap the purple and gray wires with UL approved wire connectors Do not connect the wires together Continue placing fixtures being sure to join plugs male to female Attach jumper cables as needed to work around any obstacles corners or separations 1 2 Snap the first LED fixture into the mounting tra...

Page 4: ...ts Ensure leader cable is securely connected to the female plug connector on the first LED fixture Some LED fixtures are not illuminated Check plug connectors on the LED fixtures for improper connections or short circuits Ensure any jumper cables are securely connected between the male female plug connectors of the LED fixtures Shadows within application Re position LED fixtures along mounting sur...

Reviews: