Action
Step
To manually enter a target improvement ratio, toggle off Auto stop (1), tap
the box next to Target improvement ratio (2), and enter a new value.
9
Tap Start.
10
Result: the instrument will begin CAPTURING.... After each image capture,
the signal to noise improvement ratio will update.
To manually enter a target improvement ratio during image capture, toggle
off Auto stop, tap the box next to Target improvement ratio, and enter a
new value.
11
Result: the manual boundary will show in the graph.
60
Amersham ImageQuant 800 User Manual 29383813 AA
3 Handle methods in ImageQuant 800 control software
3.4 Chemiluminescence image capture
3.4.5 SNOW chemiluminescence exposure
