3.4.3
Manual chemiluminescence exposure
Introduction
With manual exposure, the user can enter a specified exposure time.
Take a manual exposure
To take a manual exposure, use the following steps.
Action
Step
On the Home screen, tap Chemiluminescence image capture.
1
Under 1.Select Exposure, tap Manual.
2
Under Exposure time, tap the box above hour min sec 1/10 sec.
3
In the Exposure time window, tap the box under hour, min, sec, or 1/10 sec
and use either + and - buttons, or the keypad to enter the desired value.
4
Note:
The maximum time that can be set is 10 hours. The minimum time that can
be set is 0.1 sec.
Tap OK to return to the create method window.
5
Amersham ImageQuant 800 User Manual 29383813 AA
53
3 Handle methods in ImageQuant 800 control software
3.4 Chemiluminescence image capture
3.4.3 Manual chemiluminescence exposure
