CHAPTER 5: STATUS
INFORMATION
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
5–15
Information
Path
:
Status > Information
The Information pages display fixed device information. the pages are divided into three
sections: Main CPU, Comms CPU, and Hardware Versions.
Main CPU
The Information related to the Main CPU is displayed here.
Path
:
Status > Information > Main CPU
•
Hardware Revision:
The hardware revision of the relay
•
Firmware Version:
The firmware version of the Main CPU
•
Boot:
The boot code version of the Main CPU
•
Firmware Date:
The Main CPU firmware build date in the format mm/dd/yyyy
•
Firmware Time:
The Main CPU firmware build time
•
Boot Date:
The Main CPU boot code build date in the format mm/dd/yyyy
•
Boot Time:
The Main CPU boot code build time
•
Product Serial #:
The relay serial number
•
Order Code:
The installed Order Code
•
MAC Address 1:
The MAC address for copper Ethernet port 1
•
CANBUS RMIO:
The commissioned value of the CANBUS IO is displayed here. If the
relay has never been commissioned then the value will be None, i.e. default=None and
Range=6 alphanumeric characters.
•
RMIO RTDs:
The number of remote RTDs detected
Comms CPU
The Information related to the Comms CPU is displayed here.
Path
:
Status > Information > Comms CPU
•
Comms CPU fw Version:
The firmware version of the Comms CPU
•
Boot:
The boot code version of the Comms CPU
•
Comms CPU Firmware Date:
The Comms CPU firmware build date in the format mm/dd/yyyy
•
Comms CPU Firmware Time:
The Comms CPU firmware build time
•
Boot Date:
The Comms CPU boot code build date in the format mm/dd/yyyy
•
Boot Time:
The Main CPU boot code build time
•
MAC Address 1:
The MAC address for Ethernet port 4
•
MAC Address 2:
The MAC address for Ethernet port 5
Hardware Versions
Path
:
Status > Information > Hardware Versions
The Information related to the relay hardware is displayed here.
Summary of Contents for 869
