Microwaving
www.geadvantium.com
To use all
sensor
programs
32
Advantium’s microwave mode features
sensor cooking. The oven automatically
senses when food is done and shuts itself
off—eliminating the need to program
cooktimes and power levels.
1.
Press the MICROWAVE button.
2. Turn the dial to select the food
you want. Press the dial to enter.
3. Press the dial or press the START/
PAUSE button to start cooking.
Do not open the oven door until
time is counting down in the display.
If the door is opened, close it and
press START/PAUSE immediately.
If the food is not done enough, use
TIME COOK
in the microwave
selector to cook for more time.
NOTE:
Do not use the Sensor
Features twice in succession on the
same food portion—it may result in
severely overcooked or burnt food.
■
If you have been speedcooking or
baking and the oven is already
hot, it may indicate that it is too
hot for sensor cooking. Of course,
you can always continue with the
non-sensor functions.
■
To shorten or lengthen the
cook time, wait until the time
countdown shows in the display.
Then turn the dial to add or
subtract time.
■
Drinks heated with the
BEVERAGE
feature may be very hot. Remove
the container with care.
■
If you open the door while sensor
cooking,
SENSOR ERROR
will
appear. Close the door, press
START to begin again.
Notes about the Reheat program:
Reheated foods may have wide
variations in temperature. Some
areas may be extremely hot.
For improved reheating quality
on crisper foods, use the
TIMED
REHEAT
feature found by pressing
WARM/REHEAT.
It is best to use
TIME COOK
and not
REHEAT
for these foods:
■
Bread products
■
Food that must be reheated
uncovered.
■
Foods that need to be stirred
or turned.
■
Foods calling for a dry look or
crisp surface after reheating.