3
Design Information
Built-In Speedcook Ovens
Product
Dimensions
• These ovens may be installed directly into a
wall or wall oven cabinetry, 30" minimum
width.
• The front surface of the oven will be nearly
flush with surrounding cabinetry doors.
• This oven can be installed over any GE/
Monogram single electric built-in oven or a
single GE/Monogram electric built-in
warming drawer.
• This oven must be installed at least 36" above
the floor.
Advance
Planning
IMPORTANT:
This oven
is not
approved
for use above another built-in Speedcook
oven, side by side or under the countertop
installations.
• For personal safety, this oven cannot be
installed in a cabinet arrangement such as an
island or peninsula.
• Cabinets installed adjacent to wall ovens must
have an adhesion spec of at least 194
°
F
temperature rating.
• Allow for clearance to adjacent corners, walls,
drawers, etc.
Tools and Materials Required:
• 2 x 4 or 2 x 2 lumber for runners
• Saw
• Level
• Drill and 3/32" bit
• Phillips screwdriver
• Wood screws and adhesive or other hardware for installing
runners or shelf to support oven.
Tools and
Materials
Required
Electrical Requirements
• Junction box
• Electrical cable - 3-conductor or 4-conductor wire, as required
by local codes.
• UL listed conduit connector
• Wire cutters and wire stripper
29-25/32"
15"
(Recessed
Portion)
21-7/8"
15-27/32"
28-7/16"
27/32"
14-1/8"
15/32"
27/32"
20-27/32"
11/16"
7/8"
13"
9/16"
