GE AEH12AR, Owner'S Manual And Installation Instructions

4

About the controls on the air conditioner.

Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

Fan

Fan

     Delay  1–24hr

  Delay  timer 

Decrease

Mode select

Fan speed  

Decrease
Temperature  

set Increase 

and Decrease

  Delay 

timer  

Increase 
  Auto Fan  

on
Fan speed  

Increase
 Unit  power  

on/off

Air Conditioner Controls

Controls

Power Pad

Turns air conditioner on and off. When 

turned on, the display will show the room 

temperature.

Display

Shows the room temperature or time remaining 

on the Delay timer. Shows the

 Set 

temperature 

while setting the temperature in 

Cool 

or 

Energy 

Saver 

modes. The

 Set

 light will turn on while 

setting.

Temp Increase 

Ÿ

/Decrease 

ź

Pads

Use to set temperature when in

 Cool 

or 

Energy Saver

 mode. The 

Set

 light will turn on 

while setting.

Delay Timer Increase

Ÿ

 (+) /Decrease 

ź

(–) Pads

Each touch of the 

Increase

Ÿ

 / 

Decrease 

ź

pads on the unit or the

 Increase 

+

/ 

Decrease 

–

 pads on the remote control will set the delay 

time when using the 

Delay 1–24hr

timer. The 

Set

 light will turn on while setting.

Fan Speed Pads

Use to set the fan speed to

 Low, Med, High 

or 

Auto

 on the unit. 

NOTE:

 On the remote 

control, use the fan speed

 Increase 

+ 

/ 

Decrease 

–

pads to set the fan speeds to 

Low, 

Med 

or 

High

. Use the 

Auto

 pad to turn 

Auto

fan on.

Mode Pad

Use to set the air conditioner to 

Cool, Energy 

Saver

 or 

Fan Only

 mode.

Delay Pads/Delay 1-24hr Pad

'HOD\21³

When the air conditioner is off, it can 

be set to automatically come on in 1 to 24 hours 

at its previous mode and fan settings. 

'HOD\2))³

When the air conditioner is on,  

it can be set to automatically turn off in 1 to  

24 hours. 

How to set:

Press the 

Delay 1–24hr

 pad on the unit or the 

Delay pad 

on the remote control.  Each touch 

of the 

Increase

Ÿ

/ 

Decrease

ź

pads on the 

unit or the 

Increase 

+ 

/ 

Decrease 

–

pads on 

the remote control will set the timer in 1-hour 

intervals. The 

Set

 light will turn on while setting.

To review the remaining time on the 

Delay 

1–24hr

 timer, press the 

Delay 1–24hr

 pad on 

the unit or the 

Delay pad 

on the remote control. 

Use the 

Increase

Ÿ

 / 

Decrease

ź

 pads on the 

unit or the 

Increase 

+

/ 

Decrease 

–

pads on the 

remote control to set a new time if desired.

To cancel the timer,

 press the 

Delay 1–24hr 

pad 

until the light on the

 Delay 1–24hr

 pad goes off.

Reset Filter

LED will turn on when fan has accumulated 250 

hours of run time as a reminder to clean filter. 

Press 

Reset Filter

 to turn off the LED and reset 

the accumulated run time.

Note:

 The default temperature reading on the display is degree Fahrenheit ( °F).  To change the display to 

degree Celcius (°C), press the Temp Increase 

Ÿ

 and Temp Decrease 

ź

 buttons together and hold for 3 

seconds.  Repeat the process to change back to degree Fahrenheit (°F)

NOTE: 

The display always shows the room temperature except 

when setting the Set temperature or the Delay timer.

Power

On/Off

Fan

Mode

Auto

Reset

Filter

High
Med
Low

Cool
Fan Only
Energy Saver

Delay

1-24 Hrs

Set

+

-

8

Light indicates the 

delay timer is set.

Light indicates the unit is in the 

temperature or delay time Set mode.

Remote Control