GE AEZ05 and, Owner'S Manual And Installation Instructions

  PREPARE THE AIR CONDITIONER 

(cont.)

Slide the free end of the accordion panel into 

the side panel rails. Slide the panel down. Be 

sure to leave enough space to slip the top 

and bottom of the frame into the rails on the 

cabinet.  

NOTE:

 There is a right and a left accordion 

panel. Be sure to use the proper panel for each 

side.

Slide the left and right accordion panels into 

the top and bottom mounting rails.

4

  INSTALL THE AIR CONDITIONER IN 

THE WINDOW

Place the air conditioner on the sill with the 

bottom mounting rail against its back edge. 

Center it and close the window securely behind 

the top mounting rail.  It should be level or 

slightly tilted to the outside. Use a level; about 

a 1/3 bubble will be the correct case slant to the 

outside.

Extend the left and right accordion panels to 

the vertical window sashes and attach, through 

the holes in the panels, with 5 Type B screws, 

as appropriate.

6

A

B

  PREPARE THE WINDOW

 Cut the window sash seal to the proper length. 

Peel off the backing and attach the seal to the 

underside of the window sash.

5

C

7

  INSTALL SUPPORT BRACKET AND 

FOAM TOP WINDOW GASKET

Cut the foam top window gasket to the window 

width.
Stuff the foam 

between the glass 

and the window 

to prevent air and 

insects from getting 

into the room. 

NOTE:

 If the gasket supplied does not fit your 

window, obtain appropriate material locally to 

provide a proper installation seal.

A

CAUTION:  

To prevent broken 

glass or damage to 

windows, on vinyl or other 

similarly constructed 

windows, attach the 

window locking bracket to 

the window side jamb with 

one Type B screw.

B

C

Wood

Vinyl

10

Top left

Top right

D

Top mounting rail

Bottom mounting rail

or

or

Type B screws

Installation Instructions