Operating variable
Unit
V
kW
kW
C
%
A
A
C
[Unit]
bin
DR-61 Terminal 53 Switch Setting
V
DR-63 Terminal 54 Switch Setting
V
[mA]
[bin]
[Hz]
[Hz]
[Hz]
[Hz]
DR-80 Fieldbus CTW 1
hex
DR-82 Fieldbus REF 1
hex
DR-84 Comm. Option STW
hex
DR-85 Drive Port CTW 1
hex
DR-86 Drive Port REF 1
hex
DR-90 Alarm Word
DR-92 Warning Word
Table 2.1 Measurements
Status screen I
This read-out state is standard after start-up or initiali-
zation.
Press [Info] to obtain information about the measurement
links to the displayed operating variables (1.1, 1.2, 1.3, 2
and 3).
See the operating variables shown in
Illustration 2.10 Status screen I
Status screen II
See the operating variables (1.1, 1.2, 1.3 and 2) shown in
In the example, speed, motor current, motor power and
frequency are selected as variables in the first and second.
Illustration 2.11 Status screen II
Status screen III
This state displays the event and action of the Logic
Controller. For further information, see
Illustration 2.12 Status screen III
2.1.5 Parameter Set-Up
The frequency converter can be used for practically all
assignments, which is why the number of parameters is
quite large. The frequency converter offers a choice
between two programming modes - a Main Menu and a
Quick Menu mode.
The former provides access to all parameters. The latter
takes the user through a few parameters making it
possible to start operating the frequency converter.
Change a parameter in either Main Menu mode or Quick
Menu mode.
How to Program
AF-650 GP Programming Guide
DET-618C
17
2
2
