PREPARE THE WINDOW
Cut the window sash seal to the window
width and stick the adhesive side to the
bottom of the sash.
Mark the centerline of the sill. Measure
and mark the location for the support
bracket 1
″
to the left of the centerline.
B
A
3
Installation Instructions
9
WINDOW REQUIREMENTS
•
These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
•
The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
•
All supporting parts must be secured
to firm wood, masonry or metal.
•
The electrical outlet must be within
reach of the power cord.
1
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES–
WIDTH: 2
″
LENGTH:
Long enough to fit inside the
window frame.
THICKNESS:
To determine the thickness,
place a piece of wood on the stool to
make it 1/2
″
higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
2
1/2
″
higher
than frame
Storm
window
frame
Wood
Stool
12
″
min.
26
″
to 39
3
⁄
8
″
(With accordion panels)
22
″
min.
(Without accordion panels)
Window
sash seal
INSIDE
INSIDE
Sill
OUTSIDE
Stool
Center line
PREPARE THE AIR CONDITIONER
Insert the frames for the accordion
panels into the bottom mounting rail
and the top frame guides. Attach the
accordion panels to the side of the case
by pressing them onto the mounting
tabs.
4
CL
1
″
left of center line
