15
_
+
_
+
7.4
Installation of battery for remote controller
Guide for operation procedure
The general procedure:
1.Plug to power supply and press ON/OFF button to start the unit.
2.Press MODE button to select the suitable operation mode.
3.Press SWING button to swing according to a certain direction and stop whenpressing it again.
4.Press FAN button to set desired fan speed.
5.Press button to set desired temperature.
The selected procedure:
6.Press SLEEP button to set the sleep.
7.Press TIMER button, then press The selected procedure:button to set scheduled time.
Note: In AUTO mode, the unit will automatically adjust its running modes accordingto the room temperature
changes.
The remote control adopts two 7# alkaline dry-cell batteries.
1.Remove the cover from the back of the remote control and insert two newbatteries (Pay
more attention to the polarity.)
2.Re-attach the cover.
How to insert batteries
Note:
Don’t mix new and used ordifferent types of
batteries.
R e m o v e b a t t e r i e s a w a y w h e n t h e r e m o t e
control is not inuse for a long time.
The remote control should beplaced about 1m
o r m o r e a w a y f r o m t h e T V s e t o r a n y
otherelectric appliances.
It should be in it's receivingrange.
Reset Button Insert
two 7# batteries
Cover of
Batteries
