17
Operation procedures/pictures
8.1.4
Disassemble water tray
Fig.8-4
To take the movable latch of water tray and the
wire terminal that connect withelectric box, then
lift up the water tray,take out the swing motor
wire, can dis-assemble the water tray.
As show in Fig.8-4
Remove the grounding wire of the evaporator,
and remove the temperature sensor for the pipe.
Remove the socket/plug connector for the in-
door motor and swing motor of the electric box.
Screw off the screws fixing the electric box with
a screw driver. Remove the electric box.
As shown in Fig.8-5, 8-6
Fig.8-5
Fig.8-6
Water tray
8.1.5
Disassemble electric box
Tube sensor
Room sensor
Screw
Movable latch
Motor wire
Hook
Screw
