Options after capturing
Select one or more of the following actions after capturing:
•
To save the image select Save. This will allow you to reopen the image later to use
the image tools, to perform an analysis or to print the image.
See
Section 5.7 Save and manage image files, on page 148
for further instructions.
•
To modify the display settings or view details of the image, select the image tools to
the right of the image.
See
for further instructions.
•
To analyze the image, select Analyze.
See
Section 5.8 Analyze the image, on page 160
for further instructions.
•
To print the image, select Print.
•
To discard the image without saving select Done and confirm the following dialog.
Amersham Imager 600 Operating Instructions 29-0645-17 AD
117
5 Operation
5.5 Capture an image
5.5.2 Chemiluminescence capture
