3.5.5
Description of settings views
This section describes various settings views and options.
General settings view
The settings options found in the Settings view allows you to set specifications for the
instrument. The settings view is displayed by selecting the settings icon:
The illustration below shows the main components of the Settings view. For details see
Section 4.3 System settings, on page 66
1
2
3
4
5
6
7
8
10
9
Function
Part
Back button: Use to close the settings view and return to the previous view.
1
Network button: Use to set up DHCP or Static IP network
2
Show mouse cursor check box: Use to display a mouse cursor on a con-
nected external monitor by checking the check box.
3
Instrument indicator button: Use to activate the instrument connected
to the tablet computer and light the instrument Run LED light.
4
Date & Time button: Use to set date and time on the instrument
5
Focus button: Use to adjust focus
6
Sleep button: Use to set the time when the automatic CCD cooling shall
stop after periods of non-use.
7
Amersham Imager 600 Operating Instructions 29-0645-17 AD
55
3 Instrument description
3.5 Instrument software description
3.5.5 Description of settings views
