Chemiluminescence with
semi-automatic exposure
Follow the instructions below to perform chemiluminescence capture using semi-auto-
matic exposure time.
Action
Step
In the Capture tab, select Chemiluminescence.
1
Result: The options available for chemiluminescence capturing are displayed
to the right on the screen.
If your sample contains a colorimetric marker, then select the check box
Colorimetric marker.
2
To change Binning use the Change button.
3
To use the full dynamic range of the image file, check High dynamic range.
4
To minimize exposure time, leave High dynamic range unchecked.
Select Semi-Auto exposure in the exposure drop down menu.
5
Select Next and wait for the pre-exposure to finish.
6
118
Amersham Imager 680 Operating Instructions 29271308 AB
5 Operation
5.5 Capture an image
5.5.2 Chemiluminescence capture
