Action
Step
Choose
(red arrows) to adjust the upper range of the grayscale in
the displayed image indicated by the red line in the image histogram.
Enter contrast values manually if required.
Choose one of the two options displayed to the right of the image to point
out the area of interest:
8
•
Choose
, then select one point of interest in the image.
Result: The selected point is highlighted with an X.
•
Choose
, and then select two diagonal corners of an area of interest
in the image.
Result: The selected area is highlighted with a square.
Use the right hand side arrow buttons to move the highlighted point or area.
Select Start exposure and wait for the exposure to finish.
9
120
Amersham Imager 680 Operating Instructions 29271308 AB
5 Operation
5.5 Capture an image
5.5.2 Chemiluminescence capture
