4.3.2
Focus
Focus view
The focus is normally fixed. For thick samples this fixed focus may not be adequate and
you may need to temporarily adjust it.
1
2
3
4
5
6
7
8
9
10
Function
Part
The image area which displays the image of sample.
1
Double arrow buttons: Use the buttons to adjust focus in larger steps.
2
The focus value.
3
Single arrow buttons: Use the buttons to adjust focus in smaller steps.
4
Default button: Use the button to reset focus to the default value.
Note:
The default value differs between instruments.
5
Estimated focus in mm above (+) or below (-) the default focus.
6
The brightness value.
7
Plus and minus buttons: Use the buttons to adjust the brightness value.
8
OK button: Use the button to save the new settings.
9
Amersham Imager 680 Operating Instructions 29271308 AB
81
4 Installation
4.3 System settings
4.3.2 Focus
