Action
Step
If the sample is a membrane, place a membrane weight on top of the
membrane to reduce vibrations during the scan.
3
Open the main scanner door of the Amersham Typhoon scanner.
4
Place the stage on the stage holder, with the printed side of the stage facing
up, and the handle of the stage facing to the front.
5
Push the stage all the way into the scanner.
6
Close the main scanner door.
7
Prepare a titer plate for
fluorescence imaging
Follow the steps below to prepare a titer plate sample for fluorescence imaging.
Use the same sample volume to compare different samples in the titer plate.
Tip:
Action
Step
Place the guide plates on the multi stage. Align them with the grooves for
the titer plate holder so that they click into place, see
.
1
Amersham Typhoon Operating Instructions 29193226 AC
105
6 Operation
6.2 Preparing the sample
6.2.1 Preparing a sample for fluorescence imaging
