6.4
Procedures after a scan
Turn off Amersham Typhoon
scanner
Follow the steps below to turn off the instrument.
Action
Step
Remove any stage from the scanner. For information about cleaning and
storage of stages, refer to
Chapter 7 Maintenance, on page 124
1
Press the On/Off button on the front panel.
2
Result: The white Ready LED blinks and then goes out.
Push the power switch on the right side of the instrument to the O position.
3
Result: The instrument is turned off.
122
Amersham Typhoon Operating Instructions 29193226 AC
6 Operation
6.4 Procedures after a scan