WINDOWFILLER PANELS.
When pulled down, window should rest
on cabinet just behind the window filler
panel frames.
2. Slide filler panels outward until they touch window
sash tracks. Secure panels by
four Type A
screws through mounting holes in panels and
driving them into window sash and sill.
8.
SLIDE CHASSIS INTO
Carefully slide chassis back into cabinet.
Gasket
2.
foam gasket (removed in Step 2)
between bottom of chassis and inside
bottom of cabinet.
3. Reinstall
retaining screws
removed in Step 2.
9. INSTALL SASH-GAP
Cut foam sash-gap gasket to window width and
stuff it between window sashes.
INSTALL WINDOWLOCK
Type E
Bracket
Attach right angle safety lock (Type E bracket)
with Type A screw as shown.
11. REINSTALL THE GRILLE
See instructions in the Care and Cleaning
section.
LEAKS.
Some installations may require additional sealing
around the window and air conditioner. Check for
air leaks and seal.
See
for
Installation Instructions
11