Design Guide
7
CUSTOMIZATION BASICS:
Framed Or Overlay Panels, Custom Handles and Accessory Kits
Overlay panels
You may also choose to install custom overlay panels
from your cabinet manufacturer. This design provides
a seamless appearance which integrates smoothly with
surrounding cabinetry.
Standard supplied handles shown in 3/4" overlay panel position.
Professional Style Stainless Steel Models
Stainless steel wrapped refrigerators have beveled edges
and professional-style handles. These models are shipped
ready for installation.
Stainless Steel Wrapped Models
Stainless Steel wrapped models have wrapped
doors and grille panel, beveled edges, and tubular
stainless steel handles that coordinate with other
Monogram appliances. These models are shipped
ready for installation.
Trimmed Models
Trimmed models are designed to be customized with
decorative panels. Field installed custom door and grille
panels are required.
Framed panels
You may install 1/4" thick custom panels from
your cabinet manufacturer. The decorative panel slides
into the factory installed trim. Or, order black and stainless
steel accessory panels from your Monogram dealer.
Standard supplied handles shown in 1/4" panel position.
Door Handle
The standard supplied handles can be adjusted
to accommodate both framed or overlay panels. Custom
handles of your choice, supplied by your cabinet maker
can also be installed on overlay panels. If desired, you
may order ZKHSS2 Monogram stainless steel tubular
handle kit for 3/4" overlay panels. This kit contains
2 handles. Only 1 kit is needed if installing these units
as a pair.
Side Panels
Side panels must be used whenever the sides
of the product will be exposed.
Optional Accessory Kits
• ZKHSS2: Monogram Tubular Stainless Steel handles
designed to fit 3/4" overlay panels.
• ZKHPSS: Pro Tubular Stainless Steel handle designed
to fit 3/4" overlay panels.
• ZUG2: For side-by-side installation of two trimmed
models. This kit provides for the installation of a unified
custom grille panel to span the width of two units using
a framed or overlay panel.
• ZUGSS2: For side-by-side installation of two stainless
steel wrapped models. This kit provides a unified
stainless steel grille panel to span the width of two units.
Accessory Panels
Black and stainless steel accessory panels are available
from your Monogram dealer. Panels are cut to size
and ready to install.
ZPBS360–Black
ZPSS360–Stainless
Standard
Door Handle
3/4" Overlay Panel
1/4" Thick Backer Panel
.10" Thick Spacer Panel
Standard Door Handle
Framed Panel
