9
Profiles
When you start monitoring a patient, you can use the startup profile or select another profile. According to the
configuration, your software may have up to eight profiles to choose from. Profiles control many settings, including
parameter defaults, alarm detection limits, and alarm functionality.
1 . Select the patient information
area on the screen.
2 . Select the Patient tab.
3 . Select a profile from the
Profile list.
If you make changes to a profile
while using it and need to return
to its previous settings, first select
another profile and then re-select
the one you were using. If only one
profile has been enabled during
configuration, return to saved profile
settings through patient discharge/
case end or device reset.
If a profile other than the startup
menu has been selected during
the monitoring session, upon
discharge the CS ONE will return
to the startup profile for the next
monitoring session.
3
2
1
