Safety Instructions for Laser Products
The CRxVision is a Class 1 Laser Product. It uses one laser diode of a 80 mW type,
classification class IIIb, wavelength 658 nm. The laser beam’s deflection frequency is 157 Hz
(medium resolution mode) or 92 Hz (high resolution mode).
Under normal operating conditions - CRxVision with all covers - there can be no laser
radiation outside the CRxVision.
The input unit and the back cover can be removed e.g. to solve image plate jams.
The CRxVision must be switched off before removing the input unit or opening the back of
the CRxVision.
Warning: Risk of injury.
User interventions other than those described in this manual can be hazardous
with regard to laser radiation.
Cleaning of the CRxVision
Caution: Device damage possible.
Make sure no liquid gets in the CRxVision.
Note: Do not open the CRxVision for cleaning. No components inside the
CRxVision require cleaning by the user.
To clean the exterior of the CRxVision:
1. Switch off the CRxVision.
2. Remove the power plug from the socket.
3. Wipe the exterior of the CRxVision with a clean, soft, damp cloth. Use a mild soap or
detergent if required but never use ammonia-based cleaner.
CRxVision Operating Manual V1.2
21
Summary of Contents for CRxVision
