10 Illustrated Parts
M1046983 04/08
10-25
10.17.1 Vent Engine - under side
Item
Description
Stock Number
1
Interface Manifold, pneumatic engine
(with free breathing valve and mechanical overpressure valve)
O-ring, 12.42 ID x 15.98 OD (2)
1504-8505-000
1006-3615-000
1a
Seat, free breathing valve
1503-3204-000
1b*
Valve, flapper
0211-1454-100
1c
O-ring
1503-3208-000
2
Fitting, 6.35-mm (1/4-inch)
1504-3621-000
3
Plug, 6.35-mm (1/4-inch)
1503-3245-000
4
Fitting, barbed
1504-3014-000
5
Manifold
1503-3843-000
6**
Gasket, manifold
1503-3845-000
7
Plate, manifold
1503-3844-000
8***
Screw, M4x8 Pozidriv PAN
1006-3178-000
* If necessary, clean with alcohol before installing new; trim off flush with outside surface of seat
(refer to removed flapper).
** Install gasket into manifold. Check to see that it is properly positioned.
*** Carefully install plate onto manifold making sure not to disturb the gasket.
First, start all screws. Then, torque to 1.7 N-m (15 lb-in) using sequence shown.
2
4
3
1a
1b
1c
1a
1
b
a
d
c
e
f
g
6
5
7
8
Summary of Contents for Datex-Ohmeda Aisys Carestation
