7
Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
About the dryer features.
www.GEAppliances.com
Wrinkle Care
When an automatic drying cycle is
complete, the dryer will automatically
advance into
Wrinkle Care
. This provides
approximately 40 minutes of no-heat
tumbling after the clothes are dry. The
clothes can be removed at any time during
Wrinkle Care
.
Color Logic
Select the correct
FABRIC CARE
setting.
Match the particular color below the words
with the same color on the Cycle Dial.
Example:
Drying a load of clothing labeled
permanent press.
Choose the
FABRIC CARE
setting-—for
this load it would be the
EASY CARE
MED. HEAT
(which is a particular color).
Turn the Cycle Dial to the area that
has the same color as the
FABRIC CARE
setting you have chosen—for this load it
would be
EASY CARE.
2
1
End of Cycle Signal
If a volume level is selected, the signal will
sound when the cycle is done. The signal
will stop when the door is opened, or when
the Cycle Selector knob is advanced to an
OFF
position.
NOTE:
■
Remove garments promptly at the sound
of the signal. Place clothes on hangers
so wrinkles won’t set in.
■
Use the END OF CYCLE SIGNAL especially
when drying fabrics like polyester knits
and permanent press. These fabrics should
be removed so wrinkles won’t set in.
Dryness
Sensor Cycle
Dryness Sensor Cycle
(on some models)
This feature is only activated in the
COTTONS
,
EASY CARE
and
DELICATES
cycles.
The
Dryness Sensor
provides greater
drying accuracy than standard machines,
resulting in shorter dry times and better
clothes care. As the clothes tumble, they
touch a moisture sensor. The sensor will
stop the heating cycle as soon as the
clothes have reached the selected dryness.
(appearance may vary)
