44
Handset
The display on the handset shows
# MSG
when you have messages.
1. Make sure the phone is
OFF (not in TALK mode).
. Press the
MENU (SKR) to access main menu.
3. Use the
5
or
6
button to scroll to
MESSAGES
.
4. Press the
SELECT (SKL) to confirm.
5. Use the
5
or
6
button to scroll to desired
MAILBOX 1
or
2
.
6. Press the
SELECT (SKL) to access the option menu.
ANSWERER REMOTE ACCESS
shows in display and unit announces the following;
• Press to play messages.
• Press to stop.
• Press 0 while playing a message to erase.
• Press 1 to review.
• Press 3 to skip.
• Press 4 to turn OFF/ON.
• Press 7 to review menu again.
Memory Full
When the answering system memory is full, the system answers after 10 rings. You should
erase some messages so the answering system may record new messages.
NOTE: The maximum recording time of an incoming message is about
3 minutes per each and the total allowable recording time is about
20 minutes for 2 mailboxes to share. The total allowable number of
recorded message is 50 for each mailbox. The answering system will
be full when either one of the above conditions is reached.
Erasing Messages
You may erase messages three ways: one message at a time from the base; all messages
from the base or one message at a time from the handset or a phone in another location.
NOTE: Erased messages cannot be restored.
To erase one message at a time from the base:
1. Press the
PLAY/STOP button. The message plays.
. Press and release the
DELETE button.
MSG X
ERASED
shows in the display.
To erase all messages from the base:
1. Press the
PLAY/STOP button. The message plays.
. Press and hold the
DELETE button.
ERASE ALL MESSAGES?
shows in the display.
3. Press the
Yes (SKL) to confirm the deletion.
ALL MESSAGES ERASED
shows in the
display.
