16
Language
1. Make sure your base is
off
(not in talk mode).
. Press the Menu (SKL) button to enter the main menu.
. Use the
or
button to scroll to
Phone Settings
.
4. Press the Select (SKL) button to enter the submenu.
5. Use the
or
button to scroll to
Language
.
6. Press the Select (SKL) button to enter the menu.
7. Use the
or
button to scroll to the desired language. The default is
ENGLISH
.
. Press the Select (SKL) button to save your selection. You will hear a confirmation
tone.
r
ecordIng
the
o
utgoIng
a
nnouncement
For best results when recording, you should be about nine inches from the
microphone, and eliminate as much background noise as possible.
1. Make sure your base is
off
(not in talk mode).
. Press and hold the ANNOUNCE button until screen displays
ANNOUNCEMENT
RECORDING
.
. Begin speaking after you hear the beep.
4. Release the button when you finish your announcement.
NoTE: To return to the default announcement after you
have recorded your own outgoing announcement, press the
ANNoUNCE button and release it when you hear the beep or while
announcement is playing, press the DELETE button.
Sample outgoing Announcement
Hi, this is (use your name here), We can’t answer the phone right now, so please
leave your name, number and a brief message after the tone, and we’ll get back to
you soon. Thanks.
NoTE: The maximum recording time for the outgoing
announcement is 2 minutes.
r
evIewIng
the
a
nnouncement
Press and release the ANNOUNCE button to review your outgoing announcement.
a
udIble
q
uIck
s
etup
g
uIde
If you need additional assistance; while in standby mode, press the REPEAT button on
the base and follow the voice instructions.
