5. Use the number keys to enter the time and use
or
button
to select
AM
or
PM
.
6. Press the Store (SKL) button to save the setting. You will hear a confirmation tone.
Set Area Code
If you enter your local -digit area code in the area code menu, your local area code
does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit
number. Calls received from outside your local area code will display the full 10-digits
from the
Phone Setting
menu:
1. Use the
or
button to scroll to
Set Area Code
.
. Press the Select (SKL) button to enter the menu.
. Use the number keys to enter your digit area code. “ - - - “ is the default setting.
4. Press the Store (SKL) button to save the setting. You will hear a confirmation tone.
NoTE: To restore the default setting to “---”, press and release the
DELETE/fLASH button when
Set Area Code
shows on the display.
Handset Name
This menu allows you to enter a name for the handset, which displays on the idle
screen.
from the
Phone Setting
menu:
1. Use the
or
button to scroll to
Handset Name
.
. Press the Select (SKL) button to enter the menu.
. Use the number keys to enter a name (up to 15 characters). More than one letter
is stored in each of the number keys. For example, to enter Bill Smith, press the
key twice for the letter B. Press the 4 key times for the letter I. Press the 5 key
times for the letter L. Wait for 1 second, press the 5 key times for the second
letter L, and press the 1 key to insert a space between the first and last name.
Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press
the 4 key times for the letter I. Press the key for the letter T; press the 4 key
twice for the letter H.
4. Press the Store (SKL) button to save your selection. You will hear a confirmation
tone.
NoTE: If you make a mistake, use the DELETE button to backspace
and delete one character at a time.
