g
GE
OPM_SGS_USM_10K_40K_0US_V010.doc
29/88
Operating
Manual
SG Series
10, 20, 30 & 40 kVA
6.4 EDIT
MODE
The
EDIT MODE
is entered from the
parameters mode
when the
ok
button is pressed.
During this mode the LCD will display a special editing screen for the parameter being edited.
The screen contents during Edit mode is:
•
On the first line of the screen it is clearly indicated the special operating mode.
•
On the second line you will find the name of the parameter being edited.
•
On the third line is displayed the current value of the parameter.
•
The fourth line contains a condensed help text.
During the Edit mode the buttons perform the following functions:
metering
Exits
Edit
mode and enters
metering
mode; any changes are discarded.
alarms
Exits
Edit
mode and enters
alarms mode
; any changes are discarded.
parameters
Exits
Edit
mode and enters
parameters mode
; any changes are discarded.
+
Scroll from editable position to editable position;
–
Change the currently selected editable position.
ok
Return
to
parameters mode
after saving the changes.
Examples of operation during Edit mode
There are
three types of parameters
having differences in behavior during Edit mode.
Depending the type of parameters, there are different ways to select and to change the
needed values.
Type 1:
Parameters having a
large range of values
(numeric value).
As continuation of the previous example, the telephone number stored in “Tel2” must be
changed:
1
– move the selection (
block cursor
) to the next character.
2
– move the selection to the next character (
+
).
3
– change the selected character (
-
).
4
– change the selected character (
-
).
5
– press
ok
: the screen will return to
parameters mode
saving the new value.
EDIT MODE
PHONE NUMBER 2
004017464340
+ SCROLL - CHANGE
metering
1
alarms
parameters
+
–
ok
EDIT MODE
PHONE NUMBER 2
004017464340
+ SCROLL - CHANGE
metering
2
alarms
parameters
+
–
ok
