OPM_STS_400_25A_100_1GB_V011
16
GE DE STS: installation and operating manual 1.1 (GB)
Digital Energy
™
Static Transfer Switch
g
3.1 Transport
The STS should be transported in a container truck with shock protection against moves during transport. The
STS should be belted to the wall of the container. Because of limitation of height for air transport up to 1.6
meter, the STS is placed horizontally on a palette.
Move the STS in its original package to the final destination room using a pallet truck or forklift.
CAUTION
During transport, pay attention to:
For storage and transport the cabinet of the Static Transfer Switch (STS) is covered with cardboard sheet
belted with steel wrapping bands to europalettes or other suitable for forklift transport.
The package box supplies the following information:
•
Name or logo of manufacturer
•
Quality control sign
•
Warnings according to PN-67/O-79252 Standard
Figure 6. View of crate package
In case of installing a STS on upper levels, four lifting eyes are available on top of the cabinet allowing transport
with a crane or others.
The STS should be stored in closed rooms free of chemically aggressive vapours, temperature 0°C to +40°C
(32
°
F to 104
°
F) and humidity lower than 90% at 20°C (68
°
F).
3 - Installation
