7
1
2
GEAppliances.com
Power
Press to “wake up” the display. If the display is active, press to put the dryer in the idle mode.
NOTE:
Pressing
POWER
does not disconnect the appliance from the power supply.
Cycles
The cycle controls the length and tumble speed of the drying process. The chart below will help you
match the dry setting with the loads.
Sensor Cycles
COTTONS
For cottons and most linens.
MIXED LOAD
For loads consisting of cottons and poly-blends.
WRINKLE FREE
For wrinkle-free and permanent press items.
ACTIVE WEAR
Clothing worn for active sports exercise and some casual wear. Fabrics include new
technology finishes and stretch fibers such as Spandex.
DELICATES
For lingerie and special-care fabrics.
ULTRA DELICATES
For delicate fabrics.
Manual Dry Cycles
SPEED DRY
For small loads that are needed in a hurry, such as sports or school uniforms. Can also be
used if the previous cycle left some items damp, such as collars or waistbands.
DEWRINKLE
For removing wrinkles from items that are dry or slightly damp. This cycle is not
recommended for delicate fabrics.
AIR DRY
Use this feature to tumble items without heat.
My Cycles
(on some models)
MY CYCLES
Press to use, create or modify custom dry cycles.
Time Dry
Use to set your own dry time.
TIME DRY
is also recommended for small loads.
To use TIME DRY:
1.
Press the
TIME DRY
button until the amount of time you want is selected.
2.
Select the temperature by pressing the
TEMP
button.
3.
Close the door.
4.
Press the
START/PAUSE
button.
Dry Level
The sensor continuously monitors the amount of moisture in the load. When the moisture in your
clothes reaches your selected dry level, the dryer will stop.
VERY DRY
Use for heavy fabrics.
MORE DRY
Use for heavy or mixed type of fabrics.
NORMAL
Use for normal dryness level suitable for most loads. This is the preferred cycle
for energy saving.
LESS DRY
Use for lighter fabric (ideal for ironing).
DAMP DRY
For leaving items partially damp.
3
4
Consumer S
uppor
t
Tr
oubleshooting Tips
Operating Instructions
Safety Instructions
Installation
Instructions
