background image

WHEN NOT USING YOUR DRYER

Grasp the plug firmly when disconnecting this
appliance to avoid damage to the cord while
pulling. Place the cord away from traffic areas 
so it will not be stepped on, tripped over or
subjected to damage.

Do not attempt to repair or replace any part of 
this appliance or attempt any servicing unless
specifically recommended in this Owner’s Manual
or in published user-repair instructions that you
understand and have the skills to carry out.

Before discarding a dryer, or removing it from
service, remove the dryer door to prevent
children from hiding inside.

Do not tamper with controls.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

5

Consumer Support

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

ge.com

WHEN USING YOUR DRYER (cont.)

Never attempt to operate this appliance if it is
damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a
damaged cord or plug.

The interior of the machine and the exhaust
duct connection inside the dryer should be
cleaned at least once a year by a qualified
technician. See the 

Loading and Using the Dryer

section.

If yours is a gas dryer, it is equipped with an
automatic electric ignition and does not have 
a pilot light. 

DO NOT ATTEMPT TO LIGHT WITH A

MATCH. 

Burns may result from having your hand

in the vicinity of the burner when the automatic
ignition turns on.

You may wish to soften your laundered fabrics 
or reduce the static electricity in them by using 
a dryer-applied fabric softener or an anti-static
conditioner. We recommend you use either a
fabric softener in the wash cycle, according to 
the manufacturer’s instructions for those
products, or try a dryer-added product for 
which the manufacturer gives written assurance
on the package that their product can be safely
used in your dryer. Service or performance
problems caused by use of these products are 
the responsibility of the manufacturers of those
products and are not covered under the warranty
to this appliance.

Summary of Contents for DPSB620EC

























Reviews: