19
ADJUST THE OVEN THERMOSTAT—
DO IT YOURSELF!
You may find that your new oven cooks differently
than the one it replaced. We recommend that you
use your new oven for a few weeks to become more
familiar with it, following the times given in your
recipes as a guide.
If you think your new oven is too hot or too cold,
you can adjust the thermostat yourself. If you think
it is too hot, adjust the thermostat to make it cooler.
If you think it is too cool, adjust the thermostat to
make it hotter.
We do not recommend the use of thermometers,
such as those found in grocery stores, to check the
temperature setting of your new oven. These
thermometers may vary 20–40 degrees.
To Adjust the Thermostat:
1. Put the Oven Set knob in the OFF position.
2. Press and hold the HOUR INCREASE
and the HOUR DECREASE pads at the
same time for 5 seconds until the display
changes.
3. Immediately, before display changes
back, press the HOUR INCREASE or
DECREASE pads to increase or decrease
the temperature in 5 degree increments.
The oven temperature can be increased up to 35°F.
hotter or decreased 35°F. cooler.
If the oven adjustment is set cooler than the factory
setting a minus sign “–” and the new temperature will
appear in the display.
4. Wait several seconds for the control to
automatically set and return to its previous setting.
NOTE: This adjustment will not affect the broiling
or the self-cleaning temperatures. The adjustment will
be retained in memory after a power failure.
T
imed Baking
Adjust the Oven
Thermostat
To Adjust the Temperature on Models with Only an Oven Set Knob
1. Put the knob in the OFF position.
2. Pull the knob off by pulling straight out.
3. Press and hold the HOTTER or COOLER button
for 5 seconds to make the oven 20°F. hotter or
20°F. cooler.
When you are adjusting the thermostat, the
following lights will flash indicating where the
thermostat will be set when you release the
adjustment button:
OVEN ON indicates the thermostat will be set
at the factory setting.
PREHEATED indicates the thermostat will
be set 20°F. hotter.
CLEAN indicates the thermostat will be
set 20°F. cooler.
4. After you have made the adjustment,
replace the knob.
(appearance may vary)
Summary of Contents for EGR2000
Page 44: ...44 NOTES...
Page 45: ...45 NOTES...
