35
Possible Causes
Food does not broil properly
Improper rack position being
used.
• See the
Broiling guide.
Food being cooked in a hot pan.
• Use the broiling pan and grid that came with your range.
Make sure it is cool.
Aluminum foil used on the
broiling pan and grid has not
recommended.
• See the
Using the oven section.
In some areas the power
(voltage) may below.
• Preheat the broil element for10 minutes.
• Broil for the longest period of time recommended in the
Broiling guide.
Control signals after
entering cooking time or
delay start
You forgot to enter a bake
temperature or cleaning time.
• Press the BAKE pad and desired temperature or the CLEAN
pad and desired clean time.
then “linE” with a loud
tone
The installed connection
from the house to the unit is
miswired.
• Contact installer or electrician to correct miswire.
Surface units do not
work
There has been a main power
supply surge and/or a power
interruption and surge
• On the Control Panel, activate the Self Clean mode (press the
SELF CLEAN button)
• Wait for 30 seconds and then press the OFF button.
• The cooktop should now be ready to operate
The words “CLOSE
in the display
This is a normal condition.
The “CLOSE DOOR” is a
reminder message to keep the
oven door closed during broil
mode
• This is normal. Keep oven door closed during broil mode
Safety Inst
ructions
Ca
re and Cleaning
Consumer
Suppo
rt
Operating Inst
ructions
Troubleshooting Tips
Problem
What To Do